Professional Elevator Solutions has partnered with some of the world’s leading manufacturers. This allows us to offer a range of commercial lifts to suit virtually all tastes, applications and budgets. Some lifts within our range are quite unique including those with special low pit and headroom options. We also offer commercial passenger lifts with “adjacent through” car entry (most companies only offer single entry or “opposite through” car entry).
Professional Elevator Solutions also offers an end-to-end commercial service which includes the provision of lift shafts and cladding in finishes to suit your application. This is a service you simply won’t get from the major manufacturers. We pride ourselves on going the extra mile to ensure your lift is both as you want it, and suitable for your application. For any of your commercial lift needs, please get in touch with one of our friendly staff and we’ll guide you to the best available solution for your needs.
This Commercial Elevator offers an abundance of choices. It is sized to suit your particular needs, and can be supplied with an adjacent through car entry if required, and has many finishes are available.
With speeds up to 2.0m/s and carrying capacities from 450kg up to 4000kg and anything in between, this Commercial Elevator will suit most applications.
This commercial elevator is a typical MRL lift, in that it has an under slung sling and 2:1 roping. It is available in carrying capacities of 630kg to 2000kg. Speeds range from 0.6m/s, 1.0m/s & 1.6m/s.
Commercial Elevator #3 is an MRL lift characterised by its cantilevered sling, allowing access through front rear and side doors if required. Due to it being cantilevered, the carrying capacity is reduced to a maximum of 630kg, and the speed range is 0.6m/s to 1.0m/s.
Commercial Lift #4 is a Belt Driven traction lift. Many aren’t aware that the worlds largest supplier of hydraulics for lifts has been supplying traction lifts for a few years now.
The Commercial Lift #4 comes in carrying capacities of 450kg, 630kg and 1000kg and a speed of 1.0m/s.
Commercial Lift #5 is a hydraulic commercial lift from the largest hydraulic lift manufacturer in the world. No machine room is necessary, just a small machine cabinet located up to 7 metres from the shaft.
If needed, it can be located even further away, with a steel pipe supplied and installed by the builder. This lift requires a pit of 1100mm and headroom of 3400mm, it comes with carrying capacities of up to 1025kg.
Speeds vary depending on valve blocks, however maximum speed of 0.86m/s up and 1.0m/s down are achievable.
The Commercial Lift #6 offers an abundance of choices. It is sized to suit your needs, and can be supplied with an adjacent through car entry. Many finishes are available.
With speeds up to 2.0m/s and carrying capacities from 450kg up to 2000kg and anything in between, this Commercial Elevator will suit most applications.
This lift is a unique MRL traction lift. Instead of having the motor placed above the lift car, it can be placed lower down the shaft at a convenient floor level in a cut-out in the shaft wall.
It comes in a large range of carrying capacities from 480kg up to 1600kg and a speed of 1.0m/s or 1.6m/s, the pit and headroom will vary depending on the speed and carrying capacity.
This commercial lift is a typical MRL traction lift. This lift is regarded as one of the best value for money MRL Traction lifts on the market.
It is available in carrying capacities of 630kg to 1600kg, and comes with a speed of 1.0m/s or 1.6m/s. It requires a pit of 1300mm and headroom of 3500mm.
Considered by many as the best of the best, this commercial lift is one of the best-constructed lifts on the market. If the optional Ziehl-Abegg motor is selected, all the running gear is German made.
This lift is sized to suit and the carrying capacity ranges from 375kg up to 2500kg. Its pit and headroom vary, depending on the carrying capacity and speed.
If required it can come with a cantilevered design allowing single entry, opposite through entry or adjacent through entry. More interestingly from a design perspective, it can provide entry from all 3 sides at the same time. Carrying capacities range from 630kg to 1050kg.
Commercial lift #10 is one of the most unique lifts on the market today. It is designed with a headroom of only 2900mm and a pit of only 370mm, making it an Architect’s dream. This lift is sized to suit and the carrying capacity ranges up to 750kg.
This Commercial lift is truly a unique hydraulic commercial lift. In our experience it’s proved extremely popular with architects and builders.
It has been design registered in Australia as a commercial lift, even though it has a pit of only 350mm and headroom of 2600mm.
It comes in speeds of 0.63m/s, 0.88m/s and 1.0m/s. Its carrying capacity ranges from 450kg up to 1000kg.
This lift has developed a fantastic Commercial passenger lift with speeds ranging from 1.0 m/s up to 1.75 m/s.
All these lifts come with anti-vibration and sound insulation in the cabin walls, ensuring a nice comfortable and quiet ride.
We are a real innovative company with a wide range of tailor made solutions.
We provide both hydraulic and traction (MRL) lifts that are sized to suit your particular need. We provide lifts with both standard pit and headroom, as well as reduced pit and headroom.
Generally speaking, when one of the larger multi-national lift companies in Europe can’t provide a specific lift solution, they often get us to manufacture that particular lift for them.